• Subscribe
    Fill something at the
    'Theme option > Overall Elements > Top Bar > Top Bar Subscribtion' section
  • Login
contact: sales@scimetals.com



The following specifications cover Titanium CP Grade 2

  • AMS 4902
  • AMS 4941
  • AMS 4942
  • ASTM B265
  • ASTM B337
  • ASTM B338
  • ASTM B348
  • ASTM B348 (2)
  • ASTM B381
  • ASTM F467 (Ti-2)
  • ASTM F468 (2)
  • ASTM F67
  • ASTM F67 (2)
  • DIN 3.7035
  • MIL T-9046
  • MIL T-9047
  • UNS R50400

Property Results

Related Metals:

  • Allvac 40(tm)
  • RMI 40(tm)
  • Timetal(r) 65A
  • Titan 994-Ti-grade 2(tm)
  • Commercially Pure Grade 2
  • Timetal(r)65A(tm)


Chemistry Data : 

Carbon 0.1 max
Hydrogen 0.015 max
Iron 0.3 max
Nitrogen 0.03 max
Oxygen 0.25 max
Titanium Balance

Principal Design Features This is the most commonly used and widely available grade of unalloyed titanium. The grade combines excellent corrosion resistance and weldability with good strength, ductility and formability. Beta Transus (F +/- 25) 1675.

Applications Chemical processing and marine equipment as well as a variety of airframe components.

Machinability As a family, titanium and its alloys have developed a mystique as a nightmare to machine. This is simply not the case. Experienced operators have compared its characteristics to those found in 316 stainless steel. Recommended practice includes high coolant flow(to offset the material’s low thermal conductivity), slow speeds and relatively high feed rates. Tooling should be tungsten carbide designations C1-C4 or cobalt type high speed tools. 

Forming May be hot or cold formed using hydropress, power brake, stretch or drop hammer methods. Similar in characteristics to 300 series stainless steels.

Welding Rated as “good” in terms of weldability.

Heat Treatment Not hardenable by heat treatment.

Forging Roughing operations can begin at 899 C (1650 F),while finishing should be performed at 843 C(1550 F).

Hot Working Hot forming will reduce both the springback and required forming forces, and will increase the overall ductility of the material.

Cold Working The cold work characteristics of this material is similar to that of a moderately tempered austenitic stainless steel. In multiple cold forming operations, intermediate stress relief is recommended to prevent tearing or other material damage. Post-work annealing is required to reattain optimum performance characteristics.

Annealing Heat to 704 C (1300 F),hold for 2 hours follow by air cooling. For intermediate stress relieving, heat to 482 F(900 C) and hold for 45 minutes.

Other Physical Props Beta Transus (F +/- 25) 1675

Physical Data : 

Density (lb / cu. in.) 0.163
Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) 0.124
Electrical Resistivity (microhm-cm (at 68 Deg F)) 56
Melting Point (Deg F) 3020
Thermal Conductivity 9.5
Modulus of Elasticity Tension 14.9
Reduction of Area 30

Mechanical Data : 

Form Sheet
Condition Test Specimen Annealed
Temper 70
Tensile Strength 50

Form Sheet
Condition Test Specimen Annealed
Temper 600
Tensile Strength 30
Yield Strength 18
Elongation 37
Reduction of Area 75

Form Sheet
Condition Test Specimen Annealed
Temper 800
Tensile Strength 26
Yield Strength 15
Elongation 25
Reduction of Area 75

Form Sheet
Condition Test Specimen Annealed
Temper 1000
Tensile Strength 19
Yield Strength 11
Elongation 32
Reduction of Area 75



Limitation of Liability and Disclaimer of Warranty: In no event will South Coast Industrial Metals or any of its affiliates be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. South Coast Industrial Metals, Inc. assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.