• Subscribe
    Fill something at the
    'Theme option > Overall Elements > Top Bar > Top Bar Subscribtion' section
  • Login
contact: sales@scimetals.com

HASTELLOY C276 (N10276)

C-276 Alloy
UNS N10276
Trade Name: Hastelloy®

HASTELLOY® C-276 alloy is a nickel-molybdenum-chromium wrought alloy that is generally considered a versatile corrosion-resistant alloy. C-276 alloy is an improved wrought version of alloy C in that it usually doesn’t need to be solution heat-treated after welding and has vastly improved fabricability. This alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition. However, in environments where attack of the C-276 alloy weld joint is experienced, C-22® weld filler materials should be considered (see Improved Corrosion Resistance of HASTELLOY C-22 Weldments).

C-276 alloy has excellent resistance to localized corrosion and to both oxidizing and reducing media. Because of its versatility, C-276 alloy can be used where “upset” conditions are likely to occur or in multipurpose plants.

HASTELLOY C-276 alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions. It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encountered in most scrubbers. C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide. (Information provided by Haynes International, Inc.)

ASME Boiler and Pressure Vessel Specifications
Sheet/ Plate Forgings Weld Fittings Rod and Bar Tubing – Welded/ Smls Pipe – Welded/ Smls Bolting- Bolts/ Nuts Filler Metals
SB575 SB574/ SB564 SB366 SB574 SB626/ SB622 SB619/   SB622 SB574-“C”/ SB574-“C” ERNiCrMo-4


ASME Boiler and Pressure Vessel Chemical Requirements for Sheet/Plate
Note: all percentages max unless otherwise specified
Mo Cr Fe W Co C Si Mn V P S Ni
15.0-17.0 14.5-16.5 4.0-7.0 3.0-4.5 2.5 0.10 0.08 1.0 0.35 0.04 0.03 Rem


ASME Boiler and Pressure Vessel Mechanical Properties for Sheet/Plate
Tensile Strength, Min ksi  Yield Strength, (0.2% offset), Min, ksi  Min. Elongation in 2″, % Density lb/in³
100 41 40.0 0.321


Limitation of Liability and Disclaimer of Warranty: In no event will South Coast Industrial Metals or any of its affiliates be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. South Coast Industrial Metals, Inc. assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.