• Subscribe
    Fill something at the
    'Theme option > Overall Elements > Top Bar > Top Bar Subscribtion' section
  • Login
949-218-0026
contact: sales@scimetals.com

F11 CL-2 (K11572)

Material Notes:  ASTM specifications tend to emphasize the performance aspects of specific end products rather than rigid chemical compositions. Therefore, a single ASTM specification may apply to more than one alloy designation.
Key Words:  ASME SA182 F11, UNS K11572, Cr-Mo alloys, chromium molybdenum alloys, chromoly steels, chro-moly
Vendors: 
Physical Properties Metric English Comments
Density 7.85 g/cc 0.284 lb/in³ Typical of ASTM Steel
Mechanical Properties Metric English Comments
Hardness, Brinell 143 – 207 143 – 207
Tensile Strength, Ultimate 485 MPa 70300 psi
Tensile Strength, Yield 275 MPa 39900 psi
Elongation at Break 20 % 20 % in 2 in. (50 mm)
Reduction of Area >= 30 % >= 30 %
Component Elements Properties Metric English Comments
Carbon, C 0.10 – 0.15 % 0.10 – 0.15 %
Chromium, Cr 1.0 – 1.5 % 1.0 – 1.5 %
Manganese, Mn 0.30 – 0.80 % 0.30 – 0.80 %
Molybdenum, Mo 0.44 – 0.65 % 0.44 – 0.65 %
Phosphorous, P <= 0.040 % <= 0.040 %
Silicon, Si 0.50 – 1.0 % 0.50 – 1.0 %
Sulfur, S <= 0.040 % <= 0.040 %

 

 

Limitation of Liability and Disclaimer of Warranty: In no event will South Coast Industrial Metals or any of its affiliates be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. South Coast Industrial Metals, Inc. assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.